How to choose standing desk height
A standing desk has to be low enough for you to sit at and high enough to stand at. Two measurements decide that: your seated and standing elbow heights. This guide shows how to take them and what the numbers mean.
The principle
With your upper arms relaxed and your elbows bent to about 90 degrees, your forearms should rest roughly level with the keyboard. The desk surface is therefore close to your elbow height, both when sitting and when standing. Monitor height is a separate adjustment made with a stand or arm.
Estimate first, then measure
Average body proportions put the standing elbow height at roughly 60 to 66 percent of your stature and the seated elbow height, measured from the floor with a typical chair, at roughly 40 to 46 percent. Those are population averages, not measurements of you. Our height tool uses them to give a range, and it says so on every result.
To measure, follow the steps on the height tool page. Take the seated measurement in the chair you will really use, because the chair sets the figure.
Match the numbers to a desk
- The desk's verified minimum height must be at or below your seated figure.
- The desk's verified maximum height must be at or above your standing figure.
- Leave a little margin at both ends. A desk that only just reaches your height leaves no room to adjust.
Some listings give the height range of the legs only and some the range of the desktop surface. When a source is unclear about which it means, we treat the figure as not fully verified and say so on the product page.
Tall and short users
People about 190 cm and taller often need a maximum height above 1,200 mm for comfortable standing work, and shorter users may need a minimum below 700 mm. Both are less common, so check the verified range rather than assuming. See our list of desks for tall users.